Binks SV100

Inside This Document

Part sheet 77-2874R for the Binks SV100 HVLP pressure feed spray gun (7041-6931-1) — an ergonomic gun with reduced triggering effort and an HVLP air cap engineered for compliant, fine atomization on pressure-fed applications. The 8 pages cover proper setup and maintenance for maximum performance, with repair kits SV100-693K and SV100-690K and recommended filtration (HFRL-508 filter-regulator) listed among the service parts. The reference for shops running pressure-fed HVLP on production work.

From the Document

Binks SV100 ™ HVLP Pressure Feed Spray Gun 7041-6931-1 The following instructions provide the necessary information for the proper maintenance of the Binks SV100 pressure feed spray gun. Please read and understand all the information in this document in order to get the maximum performance from your new SV100 pressure spray gun. The SV100 spray gun is the result of quality engineering and development activity. The result is an ergonomic product with reduced triggering effort and fine atomization. The HVLP air cap has been specifically designed to comply with local regulatory air quality restrictions. The specification table details the operating parameters of the gun to achieve those compliant conditions. In addition, the relatively low air flow rate of the SV100 spray gun will help in containing overspray. The SV100 spray gun should be operated under the safety directions outlined in this literature. Your safety and the safety of others depend on your thorough understanding of the material contained on the Part Sheet. If you have any questions or do not understand the content in this literature, call your nearest service representative. Replaces Part Sheet 77-2874R-6 Part Sheet 77-2874R-7 SPECIFICATIONS Max. Air Pressure: 175psi/12bar For HVLP Compliance: 26 psi inlet pressure delivers (with SV100-693K cap) 10 psi air cap pressures at 12 cfm air volume For HVLP Compliance: 20 psi inlet pressure delivers (with SV100-690K cap) 10 psi air cap pressures at 6.5 cfm air volume Gun Body: Cast Aluminum Fluid Path: Stainless Steel Fluid Nozzle: Stainless Steel Fluid Needle:…