Binks 43P Airless

Inside This Document

Part sheet 77-1722R-12 for the Binks Model 43P airless gun (model 6370-0000-6), a low-to-medium-volume plural component dispensing device for spray and pour application. It uses Binks' patented opposed internal orifice static mixing principle — no moving parts — with capacity up to 20 lbs spraying. The 8 pages explain how output depends on nozzle and impingement orifice selection against applied fluid pressures, including balancing dissimilar orifices, plus operation of the nozzle, solvent purge, and safety lock, and the parts list shared with the companion 43PA automatic.

From the Document

Replaces Part Sheet 77-1722R-11 Part Sheet 77-1722R-12 43P Airless Gun Model: 6370-0000-6 Nozzle Solve N t Pu R ge Safety l ock The Binks Model 43P is a low to medium-volume plural component (spray and/or pour) dispensing device designed specifically for plural component systems. Capacity is up to 20 lbs. spray using a patented static mixing principle. The 43P, and its companion the 43PA (automatic), uses the opposed internal orifices principle with no moving parts (patented). Spray patterns are by nozzle selection. Gun output is dependent upon nozzle and impingement orifices in conjunction with applied fluid pressures. Impingement orifices usually are matched but may be dissimilar to “balance” divergent viscosities and/or ratios. The 18-8 stainless steel head is designed with cross- drilled ports for ease of maintenance. The ports allow access to remove impacted cured resins. Immersion in solvent will not affect the PTFE seals. Both resin (1/4 NPS) ports have check valves. The needle valves share common parts (springs, housing, take-up nuts, packings and followers) for simplicity. The resin needles are ball type, the purge is tapered tip. The rugged forged aluminum gun handle is anodized for corrosion resistance. The trigger’s finger geometry affords comfortable trigger pull and operation. d e S c R i P tion 2 Warning ! In this part sheet, the words WAR nin G , c AU tion and note are used to emphasize important safety information as follows: C A ution Hazards or unsafe practices which could result in minor personal injury, product or property damage. ! WAR nin G Hazards…