Wagner PEM-X1 Powder Manual

Inside This Document

Operating manual for the Wagner PEM-X1 manual powder spray gun — 72 pages, version 03/2014, order number DOC2326020. It covers correct use including operation in potentially explosive areas (II 2D rated), safety parameters, processible powder materials, and foreseeable misuse, along with explosion-protection identification and permissible device combinations with Wagner control units. General safety instructions for operators and electrical equipment lead into operation, cleaning, troubleshooting, and the spare parts list for servicing the PEM-X1 in production powder coating.

From the Document

0102 II 2D 2mJ P_01660 Manual powder spray gun PEM-X1 Version 03/2014 Translation of the Original Operating Manual 3 PEM-X1 OPERATING MANUAL VERSION 03/2014 ORDER NUMBER DOC 2326020 Table of Contents 1 ABOUT THIS MANUAL 6 1.1 Preface 6 1.2 Warnings, Notices, and Symbols in this Operating Manual 6 1.3 Languages 7 1.4 Abbreviations 7 2 CORRECT USE 8 2.1 Device Type 8 2.2 Type of Use 8 2.3 Use in Potentially Explosive Areas 8 2.4 Safety Parameters 9 2.5 Processible Working Materials 9 2.6 Reasonably Foreseeable Misuse 10 2.7 Residual Risks 10 3 IDENTIFICATION 11 3.1 Explosion Protection Identification 11 3.2 Permissible Device Combinations 11 4 GENERAL SAFETY INSTRUCTIONS 12 4.1 Safety Instructions for the Operator 12 4.1.1 Electrical Devices and Equipment 12 4.1.2 Staff Qualifications 12 4.1.3 Safe Work Environment 12 4.2 Safety Instructions for Staff 13 4.2.1 Safe Handling of WAGNER Powder Spray Devices 13 4.2.2 Grounding the Device 13 4.2.3 Product Hoses 13 4.2.4 Cleaning 14 4.2.5 Handling Powder Lacquers 14 4.3 Information About Safe Discharges 15 4.4 Protective and Monitoring Equipment 16 5 DESCRIPTION 17 5.1 Spray Gun Design 17 5.2 Functioning of the Spray Gun 17 5.3 Technical Data 18 5.3.1 Dimensions 19 5.4 Permitted Accessories 20 5.5 Scope of Delivery 20 6 ASSEMBLY AND COMMISSIONING 21 6.1 Training Assembly/Commissioning Staff 21 6.2 Storage Conditions 21 6.3 Installation Conditions 21 6.4 Preparing the Spray Gun 22 6.4.1 Selection of the Suitable Nozzle System 22 6.5 Connecting the Spray Gun 24 6.6 Grounding 26 6.6.1 Grounding the Powder Coating System 27 4 PEM-X1…