Wagner GM 4600AC Manual

Inside This Document

Operating manual for the Wagner GM 4600AC, a manual AirCoat air-assisted airless spray gun — 48 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 GM 4600AC OPERATING MANUAL EDITION 05/2011 Part No. Contents 5 STARTING UP AND OPERATING 16 5.1 Installation and connection 16 5.1.1 Typical AirCoat spraying system 16 5.1.2 Ventilation of the spray booth 17 5.1.3 Air supply 17 5.1.4 Fluid (paint) hoses 17 5.1.5 Earthing 18 5.2 Preparation of paints 18 5.3 Start-up 19 5.3.1 General rules for handling the spray gun 19 5.3.2 Preparation for starting up 20 5.4 Works 21 5.4.1 Start-up for spraying AirCoat 21 5.4.2 Adjusting the spray pattern 21 5.4.3 Replacing AirCoat nozzle 22 5.4.4 Cleaning aircoat nozzle 23 5.4.5 Eliminate nozzle clogging 23 6.0 MAINTENANCE 24 6.1 Finishing work and cleaning 25 6.2 Replacing the material hose or air hose 26 6.3 Changing or cleaning filter insert 27 6.4 Replacing parts on the valve rod 28 6.4.1 Disassembling 28 6.4.2 Replacement of valve rocker seals 29 6.4.3 Replacing the rod seal (35) 29 6.4.4 Assembling 29 6.5 Replacing the nozzle seal 30 6.6 Replacing the „air“ sealing ring 31 7 TROUBLE SHOOTING AND SOLUTION 32 9 ACCESSORIES 33 9.1 Round-jet nozzle cap 33 9.1.1 Nozzle inserts RXX 33 9.1.2 Nozzle screwed connection complete 33 9.2 AirCoat nozzles ACF3000 34 9.3 Air caps 36 9.4 Filter insert 36 9.5 Swivels 36 9.6 Hoses 37 9.7 Miscellaneous 37 10 SPARE PARTS 38 10.1 How to order spare parts? 38