Wagner AquaCoat GM 5020EACW Manual

Inside This Document

Operating manual for the Wagner AquaCoat GM 5020EACW, a waterborne (water-based) AirCoat spray gun — 160 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 OPERATING MANUAL EDITION 02/2016 ORDER NUMBER Table of Contents 5.6 Controls 32 5.6.1 VM 5020W Control Unit 32 5.6.1.1 Operating Elements, Front Side 32 5.6.1.2 Connections on the Rear Side 35 5.6.2 Product Pressure Generator 36 5.6.2.1 Puma 28-40 PE+TG Pneumatic Piston Pump 36 5.6.2.2 Cobra 40-10 Double Diaphragm Pump 37 5.6.2.3 EvoMotion 20-30 Piston Pump 38 5.6.2.4 Working in Accordance with Pump's Operating Manual 38 5.6.3 GM 5020EACW Spray Gun 39 5.6.3.1 Securing the Spray Gun Against Actuation 40 5.6.3.2 Functioning of the Spray Gun 40 5.6.3.3 Spraying Procedure for AirCoat Round Spray 42 5.6.3.4 Spraying Procedure for AirCoat Fan Spray 42 5.6.3.5 Electrostatic Effect 43 6 ASSEMBLY AND COMMISSIONING 44 6.1 Training Assembly/Commissioning Staff 44 6.2 Storage Conditions 44 6.3 Installation Conditions 44 6.4 Transportation 45 6.5 Assembly and Installation 45 6.5.1 Assembling the AquaCoat System 46 6.5.2 Ventilation of the Spray Booth 48 6.5.3 Air Supply 48 6.5.4 Product Supply 49 6.6 Grounding 50 6.7 Safety Checks 52 6.8 Preparation of Water-Based Lacquer 52 6.8.1 Viscosity Conversion Table 52 6.9 Commissioning 53 6.9.1 Safety Instructions 53 6.9.2 Preparation 53 6.9.3 Commissioning 54 6.9.3.1 AquaCoat with Puma 28-40 or EvoMotion 20-30 54 6.9.3.2 AquaCoat with Cobra 40-10