Wagner GM 1030P Manual

Inside This Document

Operating manual for the Wagner GM 1030P, a manual air spray gun — 52 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 02/2019 ORDER NUMBER TOPFINISH GM 1030P 6 ASSEMBLY AND COMMISSIONING 19 6.1 Training of Assembly/Commissioning Personnel 19 6.2 Storage Conditions 19 6.3 Installation Conditions 20 6.4 Installation and Connection 20 6.4.1 Typical Airspray Spraying System 20 6.4.2 Ventilation of the Spray Booth 20 6.4.3 Air Supply Lines 21 6.4.4 Product Supply Lines 21 6.5 Grounding 21 6.6 Safety Checks 21 6.7 Lacquer Preparations 21 6.8 Commissioning 22 6.8.1 Procedure 22 6.8.2 Verifying a Safe Operational Condition 22 7 OPERATION 23 7.1 Training the Operating Personnel 23 7.2 Tasks 23 7.2.1 Starting to Spray with the Airspray 23 7.3 Adjusting the Spray Pattern 24 7.3.1 Adjusting Spray Pattern 25 7.3.2 Setting the Product Flow Rate 25 7.4 Pressure Relief / Work Interruption 27 7.5 Cleaning the Nozzle and Eliminating Nozzle Clogging 28 8 CLEANING AND MAINTENANCE 29 8.1 Cleaning 29 8.1.1 Safety Instructions 29 8.1.2 Cleaning Personnel 29 8.1.3 Flushing and Cleaning the Spray Gun 29 8.2 Maintenance 30 8.2.1 Maintenance Personnel 30 8.2.2 Safety Instructions 30 8.2.3 Safety Checks and Maintenance Intervals 31 8.2.4 Replacing the Product Hose or Air Hose 32 9 TROUBLESHOOTING AND RECTIFICATION 33 10 REPAIR WORK 34 10.1 Repair Personnel 34 10.2 Repair Notes 34 10.3 Tools 35 10.4 Changing Needl