Wagner PEM-X1 Cup Gun Manual

Inside This Document

The full operating manual for the Wagner PEM-X1 CG powder cup gun — 80 pages, version 03/2014, order number DOC2326960, rated II 2D for explosive dust areas. It covers correct use including operation in potentially explosive areas, safety parameters, and processible powder materials, followed by setup with compatible control units, operation, cleaning, troubleshooting, and spare parts. The cup-fed configuration suits color trials, small batches, and lab work where a full powder feed setup is impractical.

From the Document

0102 II 2D 2mJ P_01725 Powder Cup Gun PEM-X1 CG Version 03 / 2014 Translation of the Original Operating Manual 3 PEM-X1 CG OPERATING MANUAL VERSION 03/2014 ORDER NUMBER DOC 2326960 Table of Contents 1 GENERAL 6 1.1 Preface 6 1.2 Warnings, Notices, and Symbols in this Operating Manual 6 1.3 Languages 7 1.4 Abbreviations 7 2 CORRECT USE 8 2.1 Device Type 8 2.2 Type of Use 8 2.3 Use in Potentially Explosive Areas 8 2.4 Safety Parameters 9 2.5 Processible Working Materials 9 2.6 Reasonably Foreseeable Misuse 10 2.7 Residual Risks 10 3 IDENTIFICATION 11 3.1 Explosion Protection Identification 11 3.2 Permissible Device Combinations 11 4 GENERAL SAFETY INSTRUCTIONS 12 4.1 Safety Instructions for the Operator 12 4.1.1 Electrical Devices and Equipment 12 4.1.2 Staff Qualifications 12 4.1.3 Safe Work Environment 12 4.2 Safety Instructions for Staff 13 4.2.1 Safe Handling of WAGNER Powder Spray Devices 13 4.2.2 Grounding the Device 13 4.2.3 Product Hoses 13 4.2.4 Cleaning 14 4.2.5 Handling Powder Lacquers 14 4.3 Information About Safe Discharges 15 4.4 Protective and Monitoring Equipment 16 5 DESCRIPTION 17 5.1 Spray Gun Design 17 5.2 Functioning of the Spray Gun 18 5.3 Technical Data 19 5.3.1 Dimensions 20 5.4 Permitted Accessories 21 5.5 Scope of Delivery 21 6 ASSEMBLY AND COMMISSIONING 22 6.1 Training Assembly/Commissioning Staff 22 6.2 Storage Conditions 22 6.3 Installation Conditions 22 6.4 Preparing the Spray Gun 23 6.4.1 Selection of the Suitable Nozzle System 23 6.4.2 Powder Cup 25 6.4.3 Assembling the Powder Cup 25 6.4.4 Handling the Powder Cup 26 6.5 Connecting the Spray…