Wagner PEM C2 Manual

Inside This Document

Operating manual for the Wagner PEM-C2 powder spray gun (part no. 0351 021), used for industrial powder coating with Wagner control units including the EPG 2007. The 28 pages identify each element of the gun — electrode, deflector cone, outer nut, body, trigger, atomizing air supply, powder supply, and power connection — and cover safe operation around high voltage (power off before servicing), setup with compatible controllers, and the service parts to keep a PEM-C2 line charging and spraying correctly.

From the Document

Operating Manual Powder Spraygun DANGER High Voltage! Turn power off before servicing! CAUTION Read rules for safe operation and instructions carefully! PEM-C2 02/01 0351801 PEM-C2 Powder Spraygun PEM-C2 Part No. 0351 021 A B D H C E G F A Electrode B Deflector cone C Outer nut D Spraygun body E Trigger F Atomizing air supply G Powder supply H Power supply The powder spraygun PEM-C2 is used for industrial powder coating. This spraygun can be operated with the following control units: • EPG 2007 with powder injector PJ 2020 PRS • EPG Digiflow with powder injector PJ-D1 The high voltage in the spraygun is activated by pressing the trigger. At the same time, the powder and compressed air supplies to the gun are turned on. Caution The user must ensure, that the spraygun is only connected to Wagner equipment! High ambient temperatures must be avoided; in particular, the hoses must not be routed through factory areas exposed to direct sunlight! To provide a safeguard against unintentional use of the spraygun, the control unit must be turned off! Powders containing metal pigments may only be processed in compliance with the powder manufacturer’s instructions. 02/01 2 0351801 PEM-C2 Table of contents Page 1. Introduction 5 1.1 Safety regulations 6 1.2 General safety rules 6 1.3 Harmless discharge 8 2. Preparing the spraygun for your application 9 2.1 Select the suitable nozzle system 9 2.2 Connecting the spraygun 10 2.3 Grounding 10 2.4 Corona-Star 11 3. Working with the spraygun 12 3.1 Starting up the spraygun 12 3.2 How to switch off the spraygun 13 3.3 How to carry out a change…