Wagner GM 5000EAC RF Manual

Inside This Document

Operating manual for the Wagner GM 5000EAC RF, a manual AirCoat air-assisted airless spray gun — 104 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 OPERATING MANUAL EDITION 09/2016 ORDER NUMBER Table of Contents 6 ASSEMBLY AND COMMISSIONING 27 6.1 Training Assembly/Commissioning Staff 27 6.2 Storage Conditions 27 6.3 Installation Conditions 27 6.4 Assembly and Installation 27 6.4.1 Typical Electrostatic Spraying System 28 6.4.2 Ventilation of the Spray Booth 29 6.4.3 Air Supply 31 6.4.4 Product Supply 31 6.4.5 Grounding 32 6.5 Preparation of Lacquer 34 6.5.1 Viscosity Conversion Table 34 6.6 Commissioning 35 6.6.1 Safety Instructions 35 6.6.2 Preparation for Commissioning 35 6.6.3 Commissioning 35 6.6.3.1 Gun Cables and Gun Cable Extensions 36 6.6.4 Verifying a Safe Operational Condition 37 7 OPERATION 38 7.1 Training the Operating Staff 38 7.2 Safety Instructions 38 7.2.1 Emergency Deactivation 39 7.2.2 General Rules for Making Adjustments to the Spray Gun 39 7.3 Work 40 7.3.1 Filling with Working Material 41 7.3.2 Checking the Spray Pattern (Without Electrostatics) 41 7.3.3 Spraying 43 7.3.4 Pressure Relief / Work Interruption 44 7.3.5 Flushing Out Clogged Round Jet Nozzles 45 7.3.6 Replacing Round Jet Nozzle's Nozzle Insert 45 7.3.7 Changing from AirCoat Round Jet to AirCoat Flat Jet 46 7.3.8 Replacing the AirCoat Flat Jet Nozzles 48 7.3.9 Cleaning of the Nozzle Parts 49 7.3.10 Eliminate Nozzle Clogging 50 7.3.11 Changi