Wagner GM 5000EA RF Manual

Inside This Document

Operating manual for the Wagner GM 5000EA RF, a manual air spray gun — 96 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 GM 5000EA 5.6 The WAGNER Electrostatic Air Spraying System 28 5.6.1 Pressure Settings for Round Jet Nozzles 28 5.6.2 Pressure Settings for Flat Jet Nozzles 29 5.6.3 Adjusting Screw 29 5.6.4 Electrostatic and Atomization 30 5.6.5 Discharge Quantity Measurements 30 6 ASSEMBLY AND COMMISSIONING 31 6.1 Training Assembly/Commissioning Staff 31 6.2 Storage Conditions 31 6.3 Installation Conditions 31 6.4 Transportation 31 6.5 Assembly and Installation 32 6.5.1 Typical Electrostatic Air Spraying System 32 6.5.2 Ventilation of the Spray Booth 33 6.5.3 Air Supply 35 6.5.4 Product Supply 35 6.5.5 Grounding 36 6.6 Preparation of Lacquer 38 6.6.1 Viscosity Conversion Table 38 6.7 Commissioning 39 6.7.1 Safety Instructions 39 6.7.2 Preparation for Commissioning 39 6.7.3 Commissioning 39 6.7.3.1 Gun Cables and Gun Cable Extensions 40 6.7.4 Verifying a Safe Operational Condition 41 7 OPERATION 42 7.1 Training the Operating Staff 42 7.2 Safety Instructions 42 7.2.1 Emergency Deactivation 43 7.2.2 General Rules for Making Adjustments to the Spray Gun 43 7.3 Work 44 7.3.1 Filling with Working Material 44 7.3.2 Checking the Spray Pattern (Without Electrostatics) 45 7.3.3 Spraying 46 7.3.4 Pressure Relief / Work Interruption 47 7.3.5 Changing from Air Round Jet to Air Flat Jet 48 7.3.6 Cleaning of