C.A. Technologies Lynx 100CM

Inside This Document

The setup and parts sheet for the C.A. Technologies Lynx 100CM — the conventional Lynx configured for heavy materials, with fluid nozzles from 1.8 mm (31-0618) through 2.2 mm (31-0622) to 2.8 mm (31-0628) and their matching 40-11xx needles on the 21-223/21-224/21-228 caps. The 4 pages cover suggested inlet pressures and the big-tip combinations for adhesives, sealers, and high-viscosity coatings on the Lynx platform.

From the Document

CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS Press / Siphon *SUGGESTED GUN INLET PRESS. FAN CONTROL SCFM AIR CAP RING AVAILABLE FLUID NOZZLES NEEDLES / marking on needle 21-223 3 31-0618 1.8mm (.070") 40-1115 (115) 21-224 6 31-0622 2.2mm (.086") 40-1122 (122) 21-228 10 31-0628 2.8mm (.110") 40-1128 (128) *Gun inlet pressures may vary as required by application **All air caps require P/N 21-1583 base & air cap ring L100CM 60-122 (Plug) 50 Pressure 21-204 MULTICOLOR SPRAY GUN WITH PRESSURE CUP PRODUCT INFORMATION L L L L Lynx 1 ynx 1 ynx 1 ynx 1 ynx 100CM 00CM 00CM 00CM 00CM DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for L L L L L100CM 100CM 100CM 100CM 100CM Spray Guns General The L100CM is a “bleeder type”(atomizing air flows continuously) spray gun with pressurized material supply cup and an internal mix style spray nozzle. It has been optimized for the application of multi-color coatings but also is excellent for single color latex or oil based interior paints. Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply or paint siphon cup to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning…