C.A. Technologies CAT SLP Parts Sheet

Inside This Document

The parts and setup sheet for the C.A. Technologies CAT SLP spray gun. The HVLP air cap and fluid nozzle chart maps the 23-1308/23-1310 series caps to fluid nozzles from 0.8 mm (33-0208) with matching 40-13xx needles, including maximum gun inlet pressures for HVLP compliance and SCFM consumption, with standard CAT Pack contents flagged. The 4 pages answer setup and reordering questions for the low-pressure SLP platform.

From the Document

HVLP AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS PRESS. OR SIPHON *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL SCFM @ MAX GUN INLET STANDARD IN CAT PACK AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 23-1308 Pressure Included 33-0208 0.8mm (.022") 40-1308 (308) 23-1310 Pressure 33-0210 1.0mm (.040") 40-1310 (310) 23-1312 Pressure 33-0212 1.2mm (.046") 40-1312 (312) 23-1313 Pressure Included 33-0213 1.3mm (.052") 40-1313 (313) 23-1314 Pressure 33-0214 1.4mm (.055") 40-1314 (314) 23-1315 Pressure 33-0215 1.5mm (.059") 40-1315 (315) 23-1317 Pressure Included 33-0217 1.7mm (.070") 40-1317 (317) 23-1319 Pressure 33-0219 1.9mm (.075") 40-1319 (319) 23-1322 Pressure 33-0222 2.2mm (.086") 40-1322 (322) Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application CAT SLP (CSLP) 60-1504 (S) 29* 13.5 CAT SLP HVLP PRESSURE FEED SPRAY GUN PRODUCT INFORMATION DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for CAT SLP Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan…