C.A. Technologies CAT-X

Inside This Document

The setup and parts sheet for the C.A. Technologies CAT-X spray gun — the hybrid-technology platform delivering extreme atomization with HVLP/pressure-reduced compliance. The air cap and fluid nozzle chart maps fluid tips from 0.8 mm (33-0208) through the range with their matching 40-14xx needles, maximum gun inlet pressures, and SCFM figures. The 4 pages cover the combinations for dialing the CAT-X into fine-finish work across automotive and industrial materials.

From the Document

HVLP/PRESSURE REDUCED AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS FLUID TIP RANGE *MAX GUN INLET PRESS. FOR HVLP FAN CONTROL SCFM @ MAX GUN INLET AVAILABLE FLUID NOZZLE TIPS NEEDLES / MARKING ON NEEDLE 33-0208 0.8mm (.022") 40-1408 (408) 33-0210 1.0mm (.040") 40-1410 (410) 33-0212 1.2mm (.046") 40-1412 (412) 33-0213 1.3mm (.052") 40-1413 (413) 33-0214 1.4mm (.055") 40-1414 (414) 33-0215 1.5mm (.059") 40-1415 (415) 33-0217 1.7mm (.070") 40-1417 (417) 33-0219 1.9mm (.075")** 40-1419 (419)** 33-0222 2.2mm (.086")** 40-1422 (422)** Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Note: Air cap test gages are available to confirm HVLP compliance. *Gun inlet pressures may vary as required by application **Needles and nozzles available for use with 24-1411 HVLP air cap only CAT-X 24-1352 (Pressure Reduced) 35* 11 13.5 0.8 - 1.7 29* 24-1411 (HVLP) 60-1385 CAT-X GRAVITY FEED SPRAY GUN PRODUCT INFORMATION The CAT-X spray gun offers both a pressure reduced air cap 24-1352 and a HVLP air cap 24-1411 for areas requiring HVLP compliance. 24-1352 - consumes 11 cfm at 35 psi gun inlet. 24-1411 - consumes 13.5 cfm at 29 psi gun inlet - for areas requiring HVLP compliance. 24-1352 pressure reduced air caps can be used with the 1.0 mm - 1.7 mm fluid orifices listed below. 24-1411 HVLP air caps can be used with the full range of fluid orifices listed below. DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for CAT-X Spray Guns Operation 1. Connect air…