C.A. Technologies/Manual

C.A. Technologies Jaguar 300C

Jaguar · Jaguar 300C

C.A. Technologies service manual for the Jaguar (models Jaguar 300C). 5-page PDF — view online or download free from CET.

Viewing: C.A. Technologies Jaguar 300C

Open Download

Inside This Document

The setup and parts sheet for the C.A. Technologies Jaguar 300C — the 300-series conventional Jaguar. The air cap and fluid nozzle chart maps recommended gun inlet pressures and SCFM to fluid nozzles from 0.8 mm (33-0608) with matching 40-13xxC needles, with the 23-2013 cap and W/A/PPS cup options flagged. The 4 pages cover setup combinations and reorder part numbers for the higher-output conventional platform.

From the Document

CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. AIR CAPS *RECOM. GUN INLET PRESS. FAN CONTROL SCFM @ MAX GUN INLET AIR CAP RING STANDARD IN CAT PACK AVAILABLE FLUID NOZZLES TIPS NEEDLES / marking on needle 33-0608 0.8mm (.022") 40-1308C (308) W, W-PPS 33-0610 1.0mm (.040") 40-1310C (310) 23-2013 W, A, PPS 33-0613 1.3mm (.052") 40-1313C (313) 23-2014 A, A-PPS 33-0614 1.4mm (.055") 40-1314C (314) 23-2016 W, A, PPS 33-0616 1.6mm (.063") 40-1315C (315) Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) *Gun inlet pressures may vary as required by application Jaguar 300C (J300C) 23-2010 45-55 60-1500 9-10.7 23-0201 GRAVITY FEED SPRAY GUN PRODUCT INFORMATION Jaguar 300C DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com Operation and Maintenance Instructions for J300C Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Screw the paint cup onto the gun’s gravity feed fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning and maintenance is essential to insure proper gun operation. Several states prohibit spraying solvent into the atmosphere and require the use of covered gun cleaner. 1. If a gun cleaner is being used, connect and…