Binks Trophy Touchup P/S Feed

Inside This Document

Part sheet 77-3042 for the Binks Trophy Series touch-up spray guns in pressure and siphon feed, HVLP and LVMP (1465-XXXX-XXXX). The Trophy touch-up brings the full-size gun's atomization technology and ergonomics to touch-up and light production work. The 16 pages include setup configurations (1465-08HV, 1465-10LV, 1465-10HV series), air supply requirements, and the complete service parts list for the smallest member of the Trophy family.

From the Document

“TROPHY” SERIES TOUCH-UP SPRAY GUNS PRESSURE AND SIPHON FEED HVLP & LVMP (1465-XXXX-XXXX) Binks Trophy Series Touch-up Spray Gun is the premier spray gun for use in pressure feed touch-up and light production spray applications and sets a new standard in durability, ergonomics, and atomization. The lightweight ergonomic design offers unsurpassed comfort and control. The latest advanced atomization technology has been incorporated for achieving consistent, fine finishes when spraying a wide range of industrial coating applications. Binks Trophy Series Touch-up Spray Guns can be used with pumps, pressure pots, pressure cups, or siphon cups. Binks Trophy Series Touch-up Spray Guns are offered in two different atomization technologies: HVLP and LVMP. READ ALL INSTRUCTIONS BEFORE OPERATING THIS BINKS PRODUCT. IMPORTANT! DO NOT DESTROY It is the customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Binks representative for additional copies of this manual. The Trophy HVLP Series of Spray Guns can be used to operate at high transfer efficiencies in compliance with “California South Coast Air Quality Management District” regulations as a High Volume, Low Pressure spray gun. I I 2 G X SPECIFICATIONS Maximum Air Pressure 100 psi / 6.9 bar (P-1) Maximum Fluid Pressure 100 psi / 6.9 bar (P-2) Gun Body Anodized Aluminum Fluid Path Stainless Steel Fluid Inlet Size 3/8" NPS / BSP(m) Air Inlet Size 1/4" NPS / BSP(m) Gun Weight 13 oz. / 374 grams Wetted Parts Stainless Steel & PTFE 77-3042-R2 (2/2018) 1 / 16…