Walther Pilot/Manual

Walther Pilot 2K Bonding

2K Bonding · PILOT 2K Bonding, V118200, V118210

Walther Pilot PILOT 2K Bonding two-component hand spray gun operating manual (German/English, December 2020). 17-page PDF — view online or download free from CET.

Viewing: Walther Pilot 2K Bonding

Inside This Document

The factory operating manual (December 2020) for the Walther Pilot PILOT 2K Bonding, a two-component hand spray gun for adhesives. It comes in a flat-jet version (V118200) and a round-jet version (V118210). The pages are in German and English. They include the exploded drawing and replacement parts list, model identification and intended use, connecting the supply lines, spray pattern tests and changes, and how to replace the material nozzle, air cap, component A needle and needle seal, and the component B parts. Cleaning, troubleshooting and technical data are also covered. This is the current generation of the earlier PILOT BOND 2K (V11815/V11816), which has its own manual page. Walther Pilot equipment is distributed and serviced in the U.S. by CET.

From the Document

19 18 Table of contents Explosion drawing 2 Declaration of conformity 19 Listing of Replacement Parts 20 1 General 22 1.1 Model identification 22 1.2 Intended use 22 1.3 Unintended use 22 2 Technical description 23 3 Safety instructions 23 3.1 Identification of safety instructions 23 3.2 General safety instructions 23 4 Connecting supply lines and Operation 24 4.1 Generating a spray pattern test 25 4.2 Changing the spray pattern 25 5 Converting / repairing the spray gun 26 5.1 Replacing the material nozzle and air cap 26 5.2 Replacing the material needle (component A) 26 5.3 Replacing a leaking needle seal (component A) 27 5.4 Replacing the component B 27 5.5 Correcting flaws of spray pattern 28 6 Cleaning 28 7 Troubleshooting and fault correction 30 8 Disposal 30 9 Technical data 31 EC/ EU Declaration of conformity We, the device manufacturer, declare at our sole responsibility that the product with the description below corresponds to the relevant based safety and health requirements. In the event of changes to the device not agreed on with us or if used improperly this declaration becomes invalid. 18 - 30 D- 42327 Wuppertal Special notes: The product is intended to be installed in another device. Commissioning is prohibited until conformity of the end product with Directive 2006/42/EC has been verified. The safety instructions of the product documentation must be observed. 1 V1182070000 1 V1182070000 Wear items are marked in bold in the spare parts list.

Document Details

Brand
Walther Pilot
Type
Manual
Product Line
2K Bonding
Models
PILOT 2K Bonding, V118200, V118210
Pages
17
Language
en

Related Documents

Walther PilotManual

Walther Pilot Bond 2K

Bond 2K

Walther Pilot service manual for the Bond 2K. 39-page PDF — view online or download free from CET.

adhesivesautomotive
Walther PilotBrochure

Walther Pilot GM 1030P Brochure

GM 1030P

Walther Pilot product brochure for the GM 1030P. 2-page PDF — view online or download free from CET.

industrial
Walther PilotManual

Walther Pilot GM 1030P Manual

GM 1030P

Walther Pilot service manual for the GM 1030P. 393-page PDF — view online or download free from CET.

industrial
Walther PilotBrochure

Walther Pilot Manual Spray Guns Lineup

Walther Pilot product brochure for the Walther Pilot Manual Spray Guns Lineup. 2-page PDF — view online or download free from CET.

industrialwood