Wagner VU1 Manual

Inside This Document

Operating manual for the Wagner VU1, a linear axis/reciprocator unit — 72 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VU 1 Ex OPERATING AND ASSEMBLY MANUAL VERSION 10/2015 ORDER NUMBER Table of Contents 6.5.2 Assembling the Reciprocator 25 6.6 Electrical Connection 26 6.6.1 Connection Diagram Principle 26 6.6.2 Connecting the Reciprocator 27 6.7 Determining the Number of Guns 28 6.8 Installation of Additional Weights 29 6.9 Setting the Upper and Lower Limit Stops 30 6.10 Arrangement of Guns 31 6.10.1 Gun Arrangement in Long-Stroke with 2 – 4 Guns 31 6.10.2 Gun Arrangement in Long-Stroke with 5 – 8 Guns 31 6.11 Grounding 32 7 OPERATION 33 7.1 Training the Operating Staff 33 7.2 Safety Instructions 33 8 CLEANING AND MAINTENANCE 34 8.1 Cleaning 34 8.1.1 Cleaning Staff 34 8.1.2 Safety Instructions 34 8.1.3 Cleaning Procedures 35 8.2 Maintenance 36 8.2.1 Maintenance Staff 36 8.2.2 Safety Instructions 36 8.2.3 Safety Checks 37 8.2.3.1 Grounding Check 37 8.2.4 Maintenance Procedures 37 8.3 Checking and Setting the Belt Tension (Visual Check) 38 8.3.1 Checking Belt Tension 39 8.3.2 Setting the Belt Tension 39 8.4 Checking and Setting the Belt Tension (Measuring Device) 40 8.4.1 Checking Belt Tension 41 8.4.2 Setting the Belt Tension 41 9 INSPECTIONS ACCORDING TO DIN EN 50176: 2010 42 9.1 Overview of Inspections 43 10 DISASSEMBLY AND DISPOSAL 45 11 TROUBLESHOOTING AND RECTIFICATION 46 12 ACCESSORIES 47