Wagner AIS Motor Manual

Inside This Document

Operating manual for the Wagner AIS Motor, a pneumatic stepping motor — 24 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 03/2019 ORDER NUMBER 7.2 Tasks 17 7.2.1 Start-up 17 7.2.2 Pressure Relief / Work Interruption 18 8 CLEANING AND MAINTENANCE 18 8.1 Cleaning 18 8.1.1 Cleaning Personnel 18 8.1.2 Cleaning 18 8.2 Maintenance 18 8.2.1 Maintenance Personnel 18 8.2.2 Maintenance Instructions 19 8.2.3 Safety Checks and Maintenance Intervals 19 9 TROUBLESHOOTING AND RECTIFICATION 20 10 DISPOSAL 20 11 SPARE PARTS 21 11.1 How Can Spare Parts Be Ordered? 21 11.2 AIS for DV100 / DV 400 Valves 22 12 EU DECLARATION OF CONFORMITY 22 5 VERSION 03/2019 ORDER NUMBER 1 ABOUT THESE INSTRUCTIONS 1.1 PREFACE The operating manual contains information about safely operating, maintaining, cleaning and repairing the device. The operating manual is part of the device and must be available to the operating and service personnel. The device may only be operated by trained personnel and in compliance with this operating manual. Operating and service personnel should be instructed according to the safety instructions. This equipment can be dangerous if it is not operated according to the instructions in this operating manual. 1.2 WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS Warning instructions in this manual highlight particular dangers to users and to the device and state measures for avoiding the hazard. Th