Wagner ADC-0301 / MPX-0403 Manual

Inside This Document

Operating manual for the Wagner ADC-0301 / MPX-0403, an analog/digital converter and multiplexer for stroke measurement — 56 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 ADC-0301 MPX-0403 OPERATING MANUAL VERSION 08/2017 ORDER NUMBER Table of Contents 6.7 ADC-0301 26 6.7.1 Preparation 26 6.7.2 Fastening, ADC-0301 26 6.7.3 Grounding, ADC-0301 27 6.7.4 Laying the Bus Cable and Connecting to MPX-0403 28 6.8 Stroke and Pressure Sensors 30 6.8.1 Preparation 30 6.8.2 Mounting the Stroke Sensors 30 6.8.3 Mounting the Pressure Sensors 31 6.8.4 Connection to ADC-0301 32 6.9 Commissioning 32 7 OPERATION 33 8 CLEANING AND MAINTENANCE 33 8.1 Cleaning 33 8.1.1 Cleaning Staff 33 8.1.2 Safety Instructions 33 8.1.3 Cleaning the Devices 34 8.2 Maintenance 34 9 TROUBLESHOOTING 34 10 REPAIRS 35 10.1 Repair Staff 35 10.2 Mounting Materials 35 10.3 Replacing the ADC–MPX Bus Cable 36 11 FUNCTION TEST 39 12 DISPOSAL 39 13 SPARE PARTS 40 13.1 How Can Spare Parts Be Ordered? 40 13.2 Multiplexer, MPX-0403 41 13.3 Set, ADC-0301 42 13.4 Stroke and Pressure Sensors 43 13.4.1 Stroke Sensor, Short 43 13.4.2 Stroke Sensor, Long 43 13.4.3 Pressure Sensor 44 13.5 Pump Spare Parts for Stroke Measurement 45 13.5.1 Jaguar, 75-150 46 13.5.2 Jaguar, 38-300 47 13.5.3 Connection Set, LM-FS 6 48 13.5.4 Jaguar, 55-200 49 13.5.5 Connection Set, LM-FS 7 50 13.5.6 Tiger, 72-300 51 13.5.7 Connection Set, LM-FS 10 52 14 DECLARATION OF WARRANTY AND CONFORMITY 53 14.1 Important Notes Regarding