Wagner VM 5000 Manual

Inside This Document

Operating manual for the Wagner VM 5000, a control unit for electrostatic manual spray guns — 52 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VM 5000 VERSION 09/2018 ORDER NUMBER 6.4 Additional Components 20 6.5 Location of the Control Unit 21 6.6 Grounding 21 6.7 Example AirCoat Spraying System 23 6.8 Ventilation of the Spray Booth 24 6.9 Verifying a Safe Operational Condition 24 7 OPERATION 25 7.1 Training the Operating Personnel 25 7.2 Tasks 25 7.2.1 Emergency Deactivation 25 7.3 Starting Up and Spraying 26 7.4 Setting and Saving Recipes 26 7.4.1 Setting the High Voltage 27 7.4.2 Setting the Current Limitation 28 7.4.3 Display During Spraying 29 7.5 Standby Mode 30 7.6 Perform Service Display 30 7.7 Device Configuration 31 7.7.1 Parameter Overview of Level 1 for Users 31 7.7.2 Access to the Device Configuration Mode 32 7.8 Setting Example for Parameter C11 34 7.9 Operating Hours Counter/Service Display 35 7.9.1 Maintenance Counter Set Up and Reading 36 7.10 External Interface 38 8 CLEANING AND MAINTENANCE 40 8.1 Cleaning 40 8.1.1 Cleaning Personnel 40 8.2 Maintenance 40 8.2.1 Maintenance Personnel 40 8.2.2 Maintenance Instructions 41 8.2.3 Safety Checks and Maintenance Intervals 41 9 TROUBLESHOOTING AND RECTIFICATION 42 10 REPAIR WORK 44 10.1 Repair Personnel 44 10.2 Repair Notes 44 11 DISPOSAL 45 12 ACCESSORIES 46 13 SPARE PARTS 47 13.1 How Can Spare Parts Be Ordered? 47 13.2 Spare Parts List for VM 5000 Control