Wagner VM 500 Manual

Inside This Document

Operating manual for the Wagner VM 500, a control unit for electrostatic manual spray guns — 40 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

VM 500 VERSION 09/2018 ORDER NUMBER 6 COMMISSIONING 19 6.1 Training of Assembly/Commissioning Personnel 19 6.2 Storage Conditions 19 6.3 Installation Conditions 19 6.4 Additional Components 19 6.5 Location of the Control Unit 20 6.6 Grounding 20 6.7 Example AirCoat Spraying System 22 6.8 Ventilation of the Spray Booth 23 6.9 Verifying a Safe Operational Condition 23 7 OPERATION 24 7.1 Training the Operating Personnel 24 7.2 Tasks 24 7.2.1 Emergency Deactivation 24 7.3 Starting Up and Spraying 25 7.4 Standby Mode 25 8 CLEANING AND MAINTENANCE 26 8.1 Cleaning 26 8.1.1 Cleaning Personnel 26 8.2 Maintenance 26 8.2.1 Maintenance Personnel 26 8.2.2 Maintenance Instructions 27 8.2.3 Safety Checks and Maintenance Intervals 27 9 TROUBLESHOOTING AND RECTIFICATION 28 10 REPAIR WORK 29 10.1 Repair Personnel 29 10.2 Repair Notes 29 11 DISPOSAL 30 12 ACCESSORIES 31 13 SPARE PARTS 33 13.1 How Can Spare Parts Be Ordered? 33 13.2 Spare Parts List for VM 500 Control Unit 34 14 EU DECLARATION OF CONFORMITY 36 4 VM 500 VERSION 09/2018 ORDER NUMBER 5 1 ABOUT THESE INSTRUCTIONS 1.1 PREFACE The operating manual contains information about safely operating, maintaining, cleaning and repairing the device. The operating manual is part of the device and must be available to the operating and service personn