Wagner Valves PV 530 / DV 530 Manual

Inside This Document

Operating manual for the Wagner Valves PV 530 / DV 530, a paint/dosing valve assembly — 52 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 07/2018 ORDER NUMBER 6.2 Storage and installation conditions 23 6.3 Assembly and Installation 23 6.4 Grounding the System 25 6.5 Pre-cleaning 25 6.6 Commissioning 26 6.6.1 Pressure tightness test 26 7 OPERATION 27 7.1 Training the Operating Personnel 27 7.2 Tasks 27 7.3 Pressure Relief/Work Interruption 27 7.4 Flushing 27 8 CLEANING AND MAINTENANCE 28 8.1 Cleaning 28 8.1.1 Cleaning Personnel 28 8.2 Maintenance 28 8.2.1 Maintenance Personnel 28 8.2.2 Maintenance Instructions 28 8.2.3 Safety Checks and Maintenance Intervals 29 8.2.4 Topping Up or Replacing the Separating Agent 30 8.2.5 Product Hoses, Pipes and Couplings 30 9 REPAIRS 31 9.1 Repair Personnel 31 9.2 Safety instructions 31 9.3 Assembly Aids 32 9.4 Disassembling 32 9.4.1 Cleaning the Parts After Disassembly 32 9.5 Assembly 33 10 TROUBLESHOOTING 35 11 DISPOSAL 36 12 ACCESSORIES 37 13 SPARE PARTS 38 13.1 How can spare parts be ordered? 38 13.2 Overview of Valves with Supplementary Components G3/8" 39 13.3 Valves 40 13.3.1 Paint valves PV 530 40 13.3.2 Dosing valves DV 530 42 13.3.3 Paint valve PV 530-DN4-TC [valve below] 44 13.4 Base plate and mounting bracket 46 13.4.1 Basic Base Plate Set 46 13.4.2 Valve Combination Base Plate 46 13.5 Holders 47 13.5.1 Basic Mounting Bracket 47 13.5.2 Valve Combination Mountin