Wagner Valves FWV / HDV Manual

Inside This Document

Operating manual for the Wagner Valves FWV / HDV, a paint/dosing valve assembly — 44 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

FWV HDV. 4 OPERATING MANUAL EDITION 03/2012 PART NO. Contents 5 PREPARATION BEFORE STARTING WORK 18 5.1 Assembly and connection 18 5.2 Mounting 18 5.3 Preliminary flushing 19 5.4 Pressure tightness test 20 5.5 Ventilation of the spray booth 20 5.6 Fluid (paint) hoses 20 5.7 Earthing the system 21 6 STARTING-UP 22 7 MAINTENANCE 23 7.1 Repair works 24 8 TROUBLE SHOOTING AND SOLUTION 26 8.1 Disposes of valves 26 9 ACCESSORIES 27 10 SPARE PARTS 28 10.1 How to order spare parts ? 28 10.2 Colour change valves (FWV) 30 10.3 Hardener dosing valves (HDV) 32 10.4 Valve down NW4 assy. 530 bar 34 10.5 Base plate set basic 36 10.6 Base plate End 530-4 36 10.7 Holder valve 530 assy. 37 10.8 Circulation connector 37 10.9 Pressure gauge combinations 38 10.10 Pressure gauge for mounting 40 10.11 Distribution set for 2 guns NW4 assy. 41 FWV HDV. 5 OPERATING MANUAL EDITION 03/2012 PART NO. 1.1 LANGUAGES 1.2 WARNINGS, NOTES AND SYMBOLS IN THESE INSTRUCTIONS 1 ABOUT THESE INSTRUCTIONS This operating manual contains information on the operation, repair and maintenance of the unit. œ Always observe these instructions when operating the unit. This equipment can be dangerous if it is not operated in accordance with this manual. Compliance with these instructions constitutes an integral component of t