Wagner Valve PV 100 DN4 Manual

Inside This Document

Operating manual for the Wagner Valve PV 100 DN4, a paint/dosing valve assembly — 36 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 08/2018 ORDER NUMBER 6.5 Pre-cleaning 21 6.6 Commissioning 21 6.6.1 Pressure tightness test 21 7 OPERATION 22 7.1 Training the Operating Personnel 22 7.2 Tasks 22 7.3 Pressure Relief / Work Interruption 22 7.4 Flushing 22 8 CLEANING AND MAINTENANCE 23 8.1 Cleaning 23 8.1.1 Cleaning Personnel 23 8.2 Maintenance 23 8.2.1 Maintenance Personnel 23 8.2.2 Maintenance Instructions 23 8.2.3 Safety Checks and Maintenance Intervals 24 8.2.4 Product Hoses, Pipes and Couplings 25 9 REPAIRS 26 9.1 Repair Personnel 26 9.2 Safety instructions 26 9.3 Assembly Aids 27 9.4 Service set 27 9.5 Disassembling the Valve 27 9.6 Cleaning the Parts After Disassembly 28 9.7 Assembling the Valve 29 10 TROUBLESHOOTING 30 11 DISPOSAL 30 12 ACCESSORIES 31 13 SPARE PARTS 32 13.1 How can spare parts be ordered? 32 13.2 Paint Valve PV 100-DN 4-SSt 33 14 EU DECLARATION OF CONFORMITY 34 5 VERSION 08/2018 ORDER NUMBER 1 ABOUT THESE INSTRUCTIONS 1.1 PREFACE The operating manual contains information about safely operating, maintaining, cleaning and repairing the device. The operating manual is part of the device and must be available to the operating and service personnel. The device may only be operated by trained personnel and in compliance with this operating manual. Operating and service personnel should