Wagner Topfinish Robot Bell 1 Manual

Inside This Document

Operating manual for the Wagner Topfinish Robot Bell 1, a high-speed rotary bell atomizer — 88 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 07/2018 ORDER NUMBER TOPFINISH RobotBell 1 5.5.2 Technical Data 27 5.5.3 Dimensions of 60° Model 28 5.5.4 Air Consumption 28 5.5.5 Connections on Valve Block - 1-Paint 29 5.5.6 Connections on Valve Block - 2-Paints 30 5.5.7 Connections on Valve Block - 4-Paints 31 5.5.8 Connections on Elbow Fitting 32 5.5.9 Connections on Control Cabinet (Valve Block - 1-Paint) 33 6 ASSEMBLY AND COMMISSIONING 34 6.1 Training of Assembly/Commissioning Personnel 34 6.2 Storage Conditions 34 6.3 Installation Conditions 34 6.4 Transportation 34 6.5 Air Quality, Air Quantity and Air Pressure 35 6.6 Assembly and Installation 36 6.6.1 Typical Electrostatic Spraying System 36 6.7 Setting up Stationary Electrostatic Systems 37 6.7.1 Assembly of the High-Speed Rotary Atomizer on the Robot 39 6.7.2 Ventilation of the Spray Booth 41 6.7.3 Air Supply Lines 42 6.7.4 Product Supply Lines 42 6.8 Grounding 42 6.9 Commissioning 44 6.9.1 Presettings 44 6.9.2 Safety Checks 44 6.9.3 Lacquer Preparations 44 6.9.4 Viscosity Conversion Table 44 6.9.5 Operating Instructions for Safe Operation 45 6.9.6 Calibration 47 6.9.7 Verifying a Safe Operational Condition 47 7 OPERATION 48 7.1 Training the Operating Personnel 48 7.2 Emergency Deactivation 48 7.3 Tasks 48 7.3.1 Adjusting the Spray Pattern 48 7.3.2 Operation