Wagner AquaCoat 5020 GA 5000EACW Manual

Inside This Document

Operating manual for the Wagner AquaCoat 5020 GA 5000EACW, a waterborne (water-based) AirCoat spray gun — 168 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 OPERATING MANUAL VERSION 08/2016 ORDER NUMBER Table of Contents 5.6 Controls 35 5.6.1 VM 5020WA Control Unit 35 5.6.1.1 Operating Elements, Front Side 35 5.6.1.2 Connections on the Rear Side 38 5.6.2 Product Pressure Generator 39 5.6.2.1 Puma 28-40 PE+TG Pneumatic Piston Pump 39 5.6.2.2 Cobra 40-10 Double Diaphragm Pump 39 5.6.2.3 EvoMotion 20-30 Piston Pump 40 5.6.2.4 Working in Accordance with Pump's Operating Manual 40 5.7 GA 5000EACW Automatic Gun 41 5.7.1 GA 5000EACW Design 41 5.7.2 GA 5000EACW Mode of Operation 42 5.7.3 GA 5000EACW Protective and Monitoring Equipment 43 5.7.4 Spraying Procedure for AirCoat Round Jet 43 5.7.5 Spraying Procedure for AirCoat Flat Jet 44 5.8 GA 4000AC Automatic Gun 44 5.9 Securing the Spray Gun Against Actuation 45 5.10 Electrostatic Effect 45 5.11 Use with Two Automatic Guns 46 6 ASSEMBLY AND COMMISSIONING 48 6.1 Training Assembly/Commissioning Staff 48 6.2 Storage Conditions 48 6.3 Installation Conditions 48 6.4 Transportation 49 6.5 Assembly and Installation 49 6.5.1 Assembling the AquaCoat System 50 6.5.2 Ventilation of the Spray Booth 52 6.5.3 Air Supply 52 6.5.4 Product Supply 53 6.6 Grounding 55 6.6.1 Grounding Scheme for GA 5000EACW 56 6.6.2 Grounding Scheme for GA 4000AC 57 6.7 Safety Checks 58 6.8 Preparation of Water-Based Lacquer