Wagner SupraCoat AirCenter Manual

Inside This Document

Operating manual for the Wagner SupraCoat AirCenter, a compressed-air supply center for the SupraCoat coating system — 36 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 SC AirCenter. OPERATING MANUAL EDITION 05/2011 PART NUMBER Contents 11 ELECTRIC CIRCUIT DIAGRAMS 28 11.1 Main circuit SC AirCenter 3000 28 11.2 Control circuit SC AirCenter 3000 29 11.3 Main circuit SC AirCenter 3200 30 11.4 Main circuit SC AirCenter 3400 32 5 SC AirCenter. OPERATING MANUAL EDITION 05/2011 PART NUMBER 4HISOPERATINGMANUALISAVAILABLEINTHEFOLLOWINGLANGUAGES ,ANGUAGE 0ART.O ,ANGUAGE 0ART.O 'ERMAN %NGLISH &RENCH $UTCH )TALIAN 3PANISH $ANISH 3WEDISH 1.2 WARNINGS, NOTES AND SYMBOLS IN THESE INSTRUCTIONS 1 ABOUT THESE INSTRUCTIONS 1.1 LANGUAGES This operating manual contains information on the operation, repair and maintenance of the unit. œ Always observe these instructions when operating the unit. This equipment can be dangerous if it is not operated in accordance with this manual. Compliance with these instructions constitutes an integral component of the warranty agreement. Warning instructions in this manual point out particular dangers to users and equipment and state measures for avoiding the hazard. These warning instructions fall into the following categories: Danger - imminent danger. Non-observance will result in death, serious injury and serious material damage. Warning - possible danger. Non-observance can result in death