Wagner ProfiTip HD Manual

Inside This Document

Instruction sheet for the Wagner ProfiTip HD, an airless spray tip — 2 pages, multilingual with an English section. Covers correct use, safety, and handling. Distributed by CET.

From the Document

Wagner ProfiTip - HP REVERSIBLE AIRLESS SPRAY TIP Instructions for use: Please read these instructions carefully and fol- low the notes given. Wagner ProfiTip is suitable for many types of coa- ting materials. The seal and the saddle (item 2) are easily replaced. operating pressure 530 bar (53 MPa) The spray gun must be locked before installing or removing the reversing switch (item 1), the tip (item 3), or when stopping work. Never point the spray gun at yourself or another person. Never put your hand or fingers into the spray jet. Contact with the spray jet can inject the coating material under the skin. Contact a doctor imme- diately for speedy medical attention in the case of skin injuries involving coating materials or thinners. Inform the doctor of the type of coating material or thinner. Always relieve the pressure of the pump when instal- ling or removing the reversing switch or the tip. Place the Wagner ProfiTip in the reversing switch. The arrow on the Wagner ProfiTip must always point towards the object being sprayed during Air- less spraying. If the Wagner ProfiTip jet becomes blocked, lock the spray gun and turn the Wagner ProfiTip by 180 o so that the arrow now points towards the spray gun. Unlock the spray gun and operate it briefly, the Wagner ProfiTip will be flu