Wagner PI-P1 / PI-F1 Powder Injector Operating Manual
Powder Injectors · PI-P1, PI-F1, 0241891
Wagner PI-P1 and PI-F1 powder injector operating manual (0241891, 08/2008). 20-page PDF — view online or download free from CET.
Inside This Document
Wagner's operating manual 0241891 (08/2008) for the PI-P1 and PI-F1 powder injectors, which feed powder to the gun on both manual and automatic powder coating systems and handle all types of coating powder. The PI-P1 connects to control units that regulate air pressure. The PI-F1 connects to control units that control the compressed-air flow. The 20 pages cover safety, the injectors' design and function, installation, operation, cleaning, wear-part replacement, troubleshooting, and the spare parts lists with order numbers. Wagner powder equipment is sold and serviced in North America by CET.
From the Document
08/2008 0241891 http://www.wagner-group.com Operating Manual Powder injectors DANGER High Voltage! Turn power off before servicing! CAUTION Read rules for safe operation and instructions carefully! PI-P1 and PI-F1 C E R T I F I E D D I N I S O 9 0 0 1 Introduction 2 0241891 – PI-P1 / PI-F1 08/2008 Powder injector PI - P1 Article No. 0241621 Powder injector PI - F1 Article No. 0241622 28 mm 110 mm F A S D 0241621_01b A Powder inlet from powder container F Feed air inlet D Dosage air inlet S Powder/air mixture outlet to gun The switched air mode : No powder is fed to A if the feed air F is switched off and, simultaneously, the dosage air quantity D is increased to maximum level. No new powder A is fed to the spray gun, while the powder feed hose S is regularly purged with dosage air. The powder flow A starts immediately as soon as the feed air is switched on again and the dosage air is switched to normal quantity. The powder injector is used for powder feeding in manual as well as automatic powder coating systems. In addition to this, the powder injector is also ideally suitable for switching mode. All types of coating powder can be processed with the injector. A choice of two powder injectors is available: • powder injector PI-P1 and • powder injector PI-F1 The PI-P1 powder injector is connected to control units, which regulate air pressure. The PI-F1 powder injector, on the other hand, is connected to control units which control the compressed air flow rate, making this
Document Details
- Brand
- Wagner
- Type
- Manual
- Product Line
- Powder Injectors
- Models
- PI-P1, PI-F1, 0241891
- Pages
- 20
- Language
- en
Related Documents
Wagner ADC-0301 / MPX-0403 Manual
ADC-0301 / MPX-0403 · ADC-0301 / MPX-0403
Wagner service manual for the ADC-0301 / MPX-0403, an analog/digital converter and multiplexer for stroke measurement. 56-page PDF — view online or download free from CET.
Wagner AIS Motor Manual
AIS Motor · AIS Motor
Wagner service manual for the AIS Motor, a pneumatic stepping motor. 24-page PDF — view online or download free from CET.
Wagner Coriolis Compact Manual
Coriolis Compact · Coriolis Compact
Wagner service manual for the Coriolis Compact, a Coriolis mass flow meter. 32-page PDF — view online or download free from CET.
Wagner EPG 3000 Manual
EPG 3000 · EPG 3000
Wagner service manual for the EPG 3000, an electrostatic power generator/controller. 44-page PDF — view online or download free from CET.
