Wagner/Manual

Wagner PEA-C4 XL HiCoat FM Operating Manual

PEA-C4 · PEA-C4XL-HiCoat FM, 390884

Wagner PEA-C4 XL HiCoat FM automatic corona powder gun operating manual (390884, 12/2011). 48-page PDF — view online or download free from CET.

Viewing: Wagner PEA-C4 XL HiCoat FM Operating Manual

Inside This Document

Wagner's operating manual 390884 (12/2011) for the PEA-C4XL-HiCoat FM, the long-body (XL) FM-approved version of the PEA-C4 automatic corona powder spray gun with HiCoat high-voltage cascade. The 48 pages cover the safety regulations and FM identification, choosing the nozzle system, the hose coupling, mounting the gun, start-up, cleaning and maintenance, troubleshooting, and the spare parts lists with Wagner order numbers. The PEA-C4 XL HiCoat is one of the most common automatic powder guns that comes through CET's repair shop. Wagner powder equipment is sold and serviced in North America by CET.

From the Document

12 / 2011 390884 http://www.wagner-group.com Operating Manual Automatic Powder Spray Gun DANGER High-Voltage! Turn power off before servicing! CAUTION Read rules for safe operation and instructions carefully! PEA-C4XL-HiCoat FM C E R T I F I E D D I N I S O 9 0 0 1 Introduction 2 390884 - PEA-C4XL-HiCoat FM 12 / 2011 Powder spray gun PEA-C4XL-HiCoat FM A Fan spray nozzle (deflector cone) B Electrode C Spray gun body D Extension E Electrical connection F Atomizing air connection G Powder hose connection Z Assembly dimension on the reciprocator 1.) Length for installation dimension Z calculation when utilizing a defl ector cone The Corona automatic spray gun PEA-C4XL-HiCoat FM is available in four lengths :  Length 1.8 meter Z = 1800 mm; 70.9 inches Article No. 390020  Length 1.4 meter Z = 1400 mm; 55.1 inches Article No. 390019  Length 1.1 meter Z = 1100 mm; 43.3 i nches Article No. 390018  Length 0.85 meter Z = 850 mm; 33.5 inches Article No. 390017 00_.doc The Corona automatic spray gun can be used for conventional types of powder and metal powder that can be electrostatically charged. The spray gun is used for industrial powder coating in automatic plants and can be operated with individual control units or with control cabinet modules . Caution The operator must ensure that the spray gun is only connected to Wagner devices! The distance of the installed spray guns to each other must be at least 300 mm . High room temperatures and, in particular, laying hoses in areas

Document Details

Brand
Wagner
Type
Manual
Product Line
PEA-C4
Models
PEA-C4XL-HiCoat FM, 390884
Pages
48
Language
en

Related Documents

WagnerManual

Wagner AquaCoat 5020 GA 5000EACW Manual

AquaCoat 5020 GA 5000EACW · AquaCoat 5020 GA 5000EACW

Wagner service manual for the AquaCoat 5020 GA 5000EACW, a waterborne (water-based) AirCoat spray gun. 168-page PDF — view online or download free from CET.

industrial
WagnerManual

Wagner AquaCoat 5020 GA 5000EAW Manual

AquaCoat 5020 GA 5000EAW · AquaCoat 5020 GA 5000EAW

Wagner service manual for the AquaCoat 5020 GA 5000EAW, a waterborne (water-based) AirCoat spray gun. 140-page PDF — view online or download free from CET.

industrial
WagnerManual

Wagner C4 / T3 Manual and Automatic Powder Guns Service Manual

PEA-C4 · PEM-C4, PEM-C4R HiCoat, PEM-C4 HiCoat FM, PEM-C4 Ergo, PEM-T3, PEM-T3R, PEM-CG4, PEM-TG3, PEA-C4 HiCoat, PEA-C4 HiCoat FM, PEA-C4XL HiCoat, 2310679

Wagner service manual DOC 2310679 (03/2012) with spare parts catalogues for the C4 corona and T3 tribo manual, cup and automatic powder guns. 152-page PDF — view online or download free from CET.

powder coating
WagnerManual

Wagner Coding Gun DB Manual

Coding Gun DB · Coding Gun DB

Wagner service manual for the Coding Gun DB, an encoding/marking spray gun. 28-page PDF — view online or download free from CET.

industrial