Wagner/Manual

Wagner PEA-C2 / PEA-C2M Automatic Powder Gun Operating Manual

PEA-C2 · PEA-C2, PEA-C2M, 0351846

Wagner PEA-C2 and PEA-C2M automatic powder spray gun operating manual (0351846, 11/00). 26-page PDF — view online or download free from CET.

Viewing: Wagner PEA-C2 / PEA-C2M Automatic Powder Gun Operating Manual

Inside This Document

Wagner's operating manual 0351846 (11/2000) for two automatic powder guns: the PEA-C2 corona gun, for conventional electrostatically chargeable powders, and the PEA-C2M Metallic gun, for highly conductive powders with metallic pigments. The 26 pages cover safety, the gun's design, installation, start-up and operation, cleaning and maintenance, troubleshooting, and the spare parts lists. The PEA-C2 is the predecessor of the PEA-C4. Wagner powder equipment is sold and serviced in North America by CET.

From the Document

11/00 0351846 Operating Manual Automatic Powder Spraygun DANGER High Voltage! Turn power off before servicing! CAUTION Read rules for safe operation and instructions carefully! PEA-C2 / PEA-C2M PEA-C2 / PEA-C2M 11/00 2 0351846 Two gun types are described in these operating instructions: • the Corona automatic powder spraygun PEA-C2 and • the Metallic automatic powder spraygun PEA-C2M . The Corona spraygun PEA-C2 is used for conventional electrostatically chargeable types of powder. For highly conductive types of coating powder (containing metallic pigments), however, only the Metallic automatic spraygun PEA-C2M may be used. Both sprayguns are used for industrial powder coating and can be operated with individual control units or with control cabinet modules . If you use a Corona spraygun PEA-C2, and want to handle types of powder which contain me- tallic pigments, you can convert this to a metallic spraygun. It is also possible to convert a me- tallic spraygun into a Corona spraygun. How to convert the spraygun is de- scribed in section 6. A deflector cone B electrode C metallic attachment D spraygun body E power supply F atomizing air supply G powder supply The high voltage is activated in the spraygun by switching on the high voltage generator and the powder release. At the same time, the powder and compressed air supplies to the gun are turned on. Caution These sprayguns may only be used for the above described application! The user must ensure, that the sprayguns PEA-C2

Document Details

Brand
Wagner
Type
Manual
Product Line
PEA-C2
Models
PEA-C2, PEA-C2M, 0351846
Pages
26
Language
en

Related Documents

WagnerManual

Wagner AquaCoat 5020 GA 5000EACW Manual

AquaCoat 5020 GA 5000EACW · AquaCoat 5020 GA 5000EACW

Wagner service manual for the AquaCoat 5020 GA 5000EACW, a waterborne (water-based) AirCoat spray gun. 168-page PDF — view online or download free from CET.

industrial
WagnerManual

Wagner AquaCoat 5020 GA 5000EAW Manual

AquaCoat 5020 GA 5000EAW · AquaCoat 5020 GA 5000EAW

Wagner service manual for the AquaCoat 5020 GA 5000EAW, a waterborne (water-based) AirCoat spray gun. 140-page PDF — view online or download free from CET.

industrial
WagnerManual

Wagner C4 / T3 Manual and Automatic Powder Guns Service Manual

PEA-C4 · PEM-C4, PEM-C4R HiCoat, PEM-C4 HiCoat FM, PEM-C4 Ergo, PEM-T3, PEM-T3R, PEM-CG4, PEM-TG3, PEA-C4 HiCoat, PEA-C4 HiCoat FM, PEA-C4XL HiCoat, 2310679

Wagner service manual DOC 2310679 (03/2012) with spare parts catalogues for the C4 corona and T3 tribo manual, cup and automatic powder guns. 152-page PDF — view online or download free from CET.

powder coating
WagnerManual

Wagner Coding Gun DB Manual

Coding Gun DB · Coding Gun DB

Wagner service manual for the Coding Gun DB, an encoding/marking spray gun. 28-page PDF — view online or download free from CET.

industrial