Wagner GA 5000EAC RF Manual

Inside This Document

Operating manual for the Wagner GA 5000EAC RF, an automatic AirCoat air-assisted airless spray gun — 108 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 GA 5000EAC OPERATING MANUAL VERSION 09/2016 ORDER NUMBER Table of Contents 5.5 Technical Data 28 5.5.1 GA 5000EAC Dimensions 29 5.6 The WAGNER Electrostatic AirCoat Spraying System 30 5.6.1 Spraying Procedure for AirCoat Round Jet 31 5.6.2 Spraying Procedure for AirCoat Flat Jet 31 5.6.3 Electrostatic Effect 32 6 ASSEMBLY AND COMMISSIONING 33 6.1 Training Assembly/Commissioning Staff 33 6.2 Storage Conditions 33 6.3 Installation Conditions 33 6.4 Assembly and Installation 34 6.4.1 Typical Electrostatic Spraying System 34 6.4.2 Connecting GA 5000EACIC 36 6.4.3 Connecting GA 5000EACEC 37 6.4.4 Ventilation of the Spray Booth 38 6.4.5 Air Supply 39 6.4.6 Product Supply 39 6.4.7 Grounding 40 6.5 Preparation of Lacquer 42 6.5.1 Viscosity Conversion Table 42 6.6 Commissioning 43 6.6.1 Safety Instructions 43 6.6.2 Preparation for Commissioning 43 6.6.3 Commissioning 43 6.7 Verifying a Safe Operational Condition 44 7 OPERATION 45 7.1 Training the Operating Staff 45 7.2 Safety Instructions 45 7.2.1 Emergency Deactivation 46 7.2.2 General Rules for Making Adjustments to the Spray Gun 46 7.3 Working 47 7.3.1 Setting the Spray Pattern Using the Air Pressure Regulator 47 7.3.2 Spraying 48 7.3.3 Pressure Relief/Work Interruption 49 7.3.4 Dismantling the Gun Cover 50 7.3.5 Flushing Out Clogged