Wagner GA 5000EA RF Manual

Inside This Document

Operating manual for the Wagner GA 5000EA RF, an automatic air spray gun — 108 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 GA 5000EA 5.5 Technical Data 28 5.5.1 GA 5000EA Dimensions 29 5.6 Spraying Procedure 30 5.6.1 Spraying Procedure for Round Jet Air Atomizing 30 5.6.2 Spraying Procedure for Flat Jet Air Atomizing 31 5.6.3 Electrostatic Effect 32 5.7 The WAGNER Electrostatic Air Spraying System 33 5.7.1 Pressure Settings for Round Jet Nozzles 34 5.7.2 Pressure Settings for Flat Jet Nozzles 34 5.7.3 Adjusting Screw 35 5.7.4 Electrostatic and Atomization 36 5.7.5 Discharge Quantity Measurements 36 6 ASSEMBLY AND COMMISSIONING 37 6.1 Training Assembly/Commissioning Staff 37 6.2 Storage Conditions 37 6.3 Installation Conditions 37 6.4 Transportation 37 6.5 Assembly and Installation 38 6.5.1 Typical Electrostatic Spraying System 38 6.5.2 Connecting GA 5000EAIC 40 6.5.3 Connecting GA 5000EAEC 41 6.5.4 Ventilation of the Spray Booth 42 6.5.5 Air Supply 43 6.5.6 Product Supply 43 6.5.7 Grounding 44 6.6 Preparation of Lacquer 46 6.6.1 Viscosity Conversion Table 46 6.7 Commissioning 47 6.7.1 Safety Instructions 47 6.7.2 Preparation for Commissioning 47 6.7.3 Commissioning 47 6.8 Verifying a Safe Operational Condition 48 7 OPERATION 49 7.1 Training the Operating Staff 49 7.2 Safety Instructions 49 7.2.1 Emergency Deactivation 50 7.2.2 General Rules for Making Adjustments to the Spray Gun 50 7.3 Working 51