Wagner GA 250AL / GA 400AL Manual

Inside This Document

Operating manual for the Wagner GA 250AL / GA 400AL, an automatic air spray gun — 48 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 VERSION 12/2018 ORDER NUMBER GA 250AL_GA 400AL 6 ASSEMBLY AND COMMISSIONING 22 6.1 Training of Assembly/Commissioning Personnel 22 6.2 Storage Conditions 22 6.3 Installation Conditions 22 6.4 Installation and Connection 22 6.4.1 Typical Spraying System 23 6.4.2 Ventilation of the Spray Booth 23 6.4.3 Product Supply Lines 24 6.5 Grounding 24 6.6 Safety Checks 24 6.7 Lacquer Preparations 24 6.7.1 Viscosity Conversion Table 25 6.8 Commissioning 26 6.8.1 Preparation Before Commissioning 26 6.8.2 Verifying a Safe Operational Condition 26 7 OPERATION 27 7.1 Training the Operating Personnel 27 7.2 Tasks 27 7.2.1 Starting Airless spraying 27 7.2.2 Pressure Relief/Work Interruption 28 7.2.3 Replacing the Airless Flat Jet Nozzle 29 7.2.4 Cleaning the Airless Flat Jet Nozzle 29 8 CLEANING AND MAINTENANCE 30 8.1 Cleaning 30 8.1.1 Cleaning Personnel 30 8.1.2 Flushing and Cleaning the Spray Gun 30 8.2 Maintenance 31 8.2.1 Maintenance Personnel 31 8.2.2 Maintenance Instructions 31 8.2.3 Safety Checks and Maintenance Intervals 32 9 TROUBLESHOOTING AND RECTIFICATION 33 10 REPAIR WORK 34 10.1 Repair Personnel 34 10.2 Repair Notes 34 10.3 Tools 35 10.3.1 Replacing of Parts on the Valve Rod 35 10.3.2 Assembling the Valve Rod and Spray Gun 36 11 FUNCTION TEST AFTER REPAIR WORK 37 12 DISPOSAL 38 13