Wagner GA 2000EA / GA 2005EA RF Manual

Inside This Document

Operating manual for the Wagner GA 2000EA / GA 2005EA RF, an automatic air spray gun — 52 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 GA2000EA_GA2005EA OPERATING MANUAL EDITION 09 /2006 PART NO. DOC-0350802 Contents 5.1.4 Earthing the system 23 5.1.4.1 Minimum cable cross-section 24 5.2 Preparation of paints 25 5.2.1 Viscosity conversion table 25 5.3 Start up 26 5.3.1 General rules for handling the spray gun 26 5.3.2 Preparation for starting up 26 5.4 Working 27 5.4.1 Start-up for spraying 27 5.4.2 Adjust the spray angle by flat jet nozzles 28 5.4.3 Exchange of round jet nozzle insert (EA round) 29 5.4.4 Changing from Air round jet to Air flat jet. 29 5.4.5 Changing the air flat jet nozzle 30 5.4.6 Protection of the gun against pollution 30 6 MAINTENANCE 31 6.1 Finishing work and cleaning 32 7 TROUBLE SHOOTING AND SOLUTION 33 8 REPAIR WORKS 34 8.1 Exchange or cleaning of paint filters 34 8.2 Adjustment of the valve rod seal 35 8.3 Replacing the valve rod 35 8.4 Replacing valve rod seals 36 8.5 Damaged electrode ? 37 8.6 Adjusting the valve movement 38 9 ACCESSORIES 39 9.1 EA flat jet nozzles 39 9.1.1 Output amount measurement with synthetic resin paint 39 9.2 EA circular jet nozzles 40 9.2.1 Output measured with synthetic resin paint 40 9.3 Long filter housing and filter insert 41 9.4 Electrical cables 41 9.5 Hoses and threaded joints 41 9.6 Miscellaneous 42 10 SPARE PART CATALOG 43 10.1 How to order spare pa