Wagner FlexData V3 Manual

Inside This Document

Operating manual for the Wagner FlexData V3, a data interface module for 2K mixing systems — 32 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 FlexData. OPERATING MANUAL EDITION 08 /2012 PART NR. 11 SCHEMATIC DIAGRAM 25 11.1 One unit without cable extension 25 11.2 1-4 units without cable extension 25 11.3 Unit with cable extension until 100 m; 328.08 26 11.3 Unit with cable extension over 100 m; 328.08 ft 27 5 FlexData. OPERATING MANUAL EDITION 08 /2012 PART NR. 1.2 WARNINGS, NOTES AND SYMBOLS IN THESE INSTRUCTIONS 1 ABOUT THESE INSTRUCTIONS 1.1 LANGUAGES 4HESEOPERATINGINSTRUCTIONSCONTAININFORMATIONABOUTTHE&LEX$ATAARCHIVINGSOFTWARE 4HESEOPERATINGINSTRUCTIONSFORMPARTOFTHE&LEX#ONTROL PLUS OPERATINGINSTRUCTIONS !LWAYSFOLLOWBOTHINSTRUCTIONSWHENUSINGTHEUNIT 4HISFACILITYCANBEDANGEROUSIFITISNOTOPERATEDINACCORDANCEWITHTHEOPERATINGINSTRUC TIONS /BSERVANCEOFTHESEDOCUMENTSISAPREREQUISITEFORTHEGUARANTEEAGREEMENTS Warning instructions in this manual point out particular dangers to users and equipment and state measures for avoiding the hazard. These warning instructions fall into the following categories: Danger - imminent danger. Non-observance will result in death or serious. Warning - possible danger. Non-observance can result in death or serious injury. Caution - a possibly hazardous situation. Non-observance can result in minor injury. Note - provide information on par