Wagner Evobell 3500R Manual

Inside This Document

Operating manual for the Wagner Evobell 3500R, a high-speed rotary bell atomizer — 88 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 Evobell 3500R OPERATING MANUAL EDITION 09/2010 PART NO. Contents 5 START-UP AND OPERATION 30 5.1 Installation and connection 30 5.1.1 Typical electrostatic spraying system 30 5.1.2 Ventilation of the spray booth 32 5.1.3 Air supplies 32 5.1.4 Paint supplies 32 5.1.5 Earthing 33 5.1.6 Preparation of paints 35 5.1.7 Viscosity conversion table 35 5.2 Operating instructions for safe operation 36 5.3 Starting up 37 5.3.1 General rules for handling the high rotation atomizer 37 5.3.2 Preparation for starting up 38 5.4 Works 40 5.4.1 Start-up for spraying 40 5.4.2 Spray pattern 40 5.4.3 Removing / fitting the casing 41 5.4.4 Replace bell 43 5.4.5 Remove distributor 45 5.4.6 Remove air conduction 48 5.4.7 Remove material tube/ valve block 50 6 CARE AND MAINTENANCE 54 6.1 Finishing work and cleaning 55 6.2 Maintenance work 56 6.2.1 Visual inspection connections and hose lines 56 6.2.2 Visual inspection valve block 57 6.2.3 Visual inspection bell flushing valve 57 6.2.4 Visual inspection sensor 57 6.2.5 Visual inspection bell 57 6.2.6 Visual inspection distributor 57 6.2.7 Visual inspection air conduction 57 6.2.8 Visual inspection material tube 57 6.3 Inspections in accordance with DIN EN 50176 58 6.3.1 Overview of inspections 58 6.3.2 Inspection intervals in accordance with table 4 of