Wagner Evobell 3500 Manual

Inside This Document

Operating manual for the Wagner Evobell 3500, a high-speed rotary bell atomizer — 92 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 Evobell 3500 OPERATING MANUAL VERSION 03/2015 ORDER NUMBER Table of Contents 5 COMMISSIONING AND OPERATION 31 5.1 Installation and Connection 31 5.1.1 Typical Electrostatic Spraying System 31 5.1.2 Ventilation of the Spray Booth 33 5.1.3 Air Supply 33 5.1.4 Product Supply 33 5.1.5 Grounding 34 5.1.6 Paint Preparations 36 5.1.7 Viscosity Conversion Table 36 5.2 Operating Instructions for Safe Operation 37 5.3 Commissioning 38 5.3.1 General Rules for Handling the High-speed Rotary Atomizer 38 5.3.2 Preparation for Starting Up 39 5.4 Work 41 5.4.1 Preparations for Spraying 41 5.4.2 Adjusting the Spray Pattern 41 5.4.3 Removing/Attaching the Casing 42 5.4.4 Replacing the Bell 43 5.4.5 Removing the Distributor 45 5.4.6 Removing the Air Guide 48 5.4.7 Replacing the Product Tube/Valve Block 50 5.4.8 Replacing the Resistance Block/High-Voltage Cable 53 6 CARE AND MAINTENANCE 55 6.1 Decommissioning and Cleaning 56 6.2 Maintenance Work 57 6.2.1 Visual Inspection of Connections and Complete hoses 57 6.2.2 Valve Block Visual Inspection 58 6.2.3 Visual Inspection of the Bell Flushing Valve 58 6.2.4 Visual Inspection of the Resistance Block 58 6.2.5 Visual Inspection of the Sensor 58 6.2.6 Visual Inspection of the Bell 58 6.2.7 Visual Inspection of the Distributor 58 6.2.8 Visual Inspection