Wagner Evobell 3000 Manual

Inside This Document

Operating manual for the Wagner Evobell 3000, a high-speed rotary bell atomizer — 88 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 Evobell 3000 OPERATING MANUAL EDITION 05/2010 PART NO. 5 START-UP AND OPERATION 30 5.1 Put the equipment in place and connect 30 5.1.1 Typical electrostatic spraying system 30 5.1.2 Ventilation of the spray booth 32 5.1.3 Air supply 32 5.1.4 Fluid (paint) hoses 32 5.1.5 Earthing 33 5.1.6 Preparation of paints 35 5.1.7 Viscosity conversion table 35 5.2 Operating instructions for safe operation 36 5.3 Start up 37 5.3.1 General rules for handling the high-rotation atomizer 37 5.3.2 Preparation for starting up 38 5.4 Start up Turbine 40 5.5 Working 41 5.5.1 Start-up for spraying 41 5.5.2 Spray pattern 41 5.5.3 Remove / Attach the casing 42 5.5.4 Replacing the bell 43 5.5.5 Changing the distributor 45 5.4.6 Replacing the air conduction 47 5.4.7 Replacing material tube / Valve block 49 5.5.8 Replacing the resistance block / high voltage cable 52 6 MAINTENANCE 54 6.1 Finishing work and cleaning 55 6.2 Maintenance work 56 6.2.1 Visual checks Joints and fluid hoses 56 6.2.2 Visual check Valve block 57 6.2.3 Visual check Bell solvents valve 57 6.2.4 Visual check Resistance block 57 6.2.5 Visual check Sensor 57 6.2.6 Visual check Bell 57 6.2.7 Visual check Distributor 57 6.2.8 Visual check Air conduction 57 6.2.9 Visual check Material tube 57 6.3 Inspections in accordance with DIN EN 5017