Wagner EPG 5000 Manual

Inside This Document

Operating manual for the Wagner EPG 5000, an electrostatic power generator/controller — 72 pages. Covers correct use (including operation in potentially explosive areas and processible materials), explosion-protection identification, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

4 EPG 5000 OPERATING MANUAL VERSION 09/2016 ORDER NUMBER Table of Contents 6.7 Commissioning 33 6.8 Verifying a Safe Operational Condition 33 7 OPERATION 34 7.1 Training the Operating Staff 34 7.2 Safety Instructions 34 7.2.1 Emergency Deactivation 35 7.3 Starting Up the Control Unit 35 7.4 Setting and Saving Recipes 36 7.4.1 Setting the High Voltage 37 7.4.2 Setting the Current Limitation 38 7.4.3 Display During Spraying 39 7.5 Standby Operation 40 7.6 Display "Perform Service" 41 7.7 Device Configuration 42 7.7.1 Parameter Overview of Level 1 for Users 42 7.7.2 Access to the Device Configuration Mode 45 7.7.3 Setting Example "Parameter C11" 46 7.8 Operating Hours Counter/Service Display 48 7.8.1 Maintenance Counter Set Up and Reading 49 7.9 External Interface 50 8 CLEANING AND MAINTENANCE 52 8.1 Cleaning 52 8.1.1 Cleaning Staff 52 8.1.2 Safety Instructions 52 8.2 Maintenance 54 8.2.1 Maintenance Staff 54 8.2.2 Safety Instructions 54 8.2.3 Safety Checks 55 9 TROUBLE SHOOTING AND RECTIFICATION 56 10 REPAIR WORK 59 10.1 Repair Staff 59 10.2 Safety Instructions 59 11 DISPOSAL 60 12 ACCESSORIES 61 13 SPARE PARTS 62 13.1 How Can Spare Parts Be Ordered? 62 13.2 EPG 5000 Control Unit 63 14 WARRANTY AND CONFORMITY DECLARATIONS 66 14.1 Important Notes Regarding Product Liability 66 14.2