Sagola 612 Pressure Tank Manual

Inside This Document

Operating manual for the Sagola 612 pressure feed tank. Covers safe start-up, material loading, air and fluid hose connection, pressure regulation, cleaning, and the full parts breakdown.

From the Document

Warnings It is advisable to read all the instructions indicated below carefully. Before putting the unit into operation , and especially after each cleaning and/or repair operation, a check must be made that the pressure pot components are securely tightened and that the air and/ or product hoses are airtight (no air leaks). Check that the unit’s safety devices work properly before using it. Ensure that the products to be applied are chemically compatible with the components these come into contact with (aluminium, stainless steel, polythene and acetylene resin). The unit is easy to handle thanks to its design and the simplicity of its mechanisms. Use it according to the operating, maintenance and safety instructions indicated in this manual and follow the application methods indicated to obtain the required finish quality. Components 1 Body of the tank 2 Lid 3 Fluid outlet ball valve 4 Air inlet 5 Pressure regulator 6 Security Valve Fig.01 1 2 3 4 6 5 6 1. Interrupt the air supply by closing the air inlet ball valve. Unscrew the clamps and remove the lid. Leave the discharge valve o