Sagola 6110 INOX Industrial Pressure Tank Manual

Inside This Document

Manual for the stainless-steel (INOX) 6110 industrial pressure tank range, covering models 6110, 652, and 653. Details safe pressurized operation, material handling, agitation, regulation, cleaning, and maintenance for industrial pressure-feed setups.

From the Document

Warnings It is advisable to read all the instructions indicated below carefully. Before putting the unit into operation , and especially after each cleaning and/or repair operation, a check must be made that the pressure pot components are securely tightened and that the air and/or product hoses are airtight (no air leaks). Check that the unit’s safety devices work properly before using it. Ensure that the products to be applied are chemically compatible with the components these come into contact with (aluminium, stainless steel, polythene and acetylene resin). The unit is easy to handle thanks to its design and the simplicity of its mechanisms. Use it according to the operating, maintenance and safety instructions indicated in this manual and follow the application methods indicated to obtain the required finish quality. Components 1 Body of the tank 2 Lid 3 Fluid outlet ball valve 4 Manual remover handle 5 Air inlet 6 Pressure regulator (gun) 7 Pressure regulator (pressure pot) 8 Security Valve 9 Clamp 652/653 INOX 6110 INOX 6110 INOX 4 9 2 3 8 9 1 Fig.01 3 5 7 6 ENGLISH 32/33 1.