DeVilbiss PROlite Suction/Pressure

Inside This Document

Service manual SB-E-2-997 for the DeVilbiss PROLite suction and pressure feed spray guns, ATEX-rated II 2 G X. The 24 pages document specifications including 15 bar (217 psi) maximum fluid input pressure, anodised aluminum air cap retaining ring, sprayhead, and adjusting knobs, stainless steel fluid nozzle, needle, inlet, and trigger stud, and a 950 g working weight. Triggered air inlet pressures are tabulated by setup, with full parts lists and repair kit references (80079-36, 80079-37) for rebuilding the platform.

From the Document

EN IMPORTANT! DO NOT DESTROY READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT. SERVICE MANUAL PROLite Suction and Pressure Spray Guns It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Carlisle Fluid Technologies representative for additional copies of this manual. II 2 G X/Ex h II Gb X SB-E-2-997 R1.0 1/24 www.carlisleft.com EN P2 = Max. Fluid Input Pressure 15 bar [217 psi] Gun Air Inlet Pressure with gun triggered See Table 1 Page 8 Air Cap Retaining Ring, Sprayhead, Adjusting Knobs Anodised Aluminum 3/8" BSP Trigger DIMENSIONS Stainless Steel Fluid Nozzle, Fluid Needle, Fluid Inlet and Trigger Stud 950g [33.5 oz] Electroless Nickel Plated Brass Springs, Clips, Screws Air Valve Stem Electroless Nickel Plated Brass WEIGHT GUN ONLY 500g [17.6 oz] WITH CUP GUN ONLY Air Inlet, Valve Body, Air Valve Body, Packing Nut Chrome Plated Brass Stainless Steel Cup, Lid, Tube and Cam Aluminum 1/4'' Universal 174 x 175 x 18 [6.9 x 6.9 x 0.7 in] L x H x W mm [inches] WITH CUP 177 x 302 x 115 [7.0 x 11.9 x 4.5 in] 12 bar [175 psi] Gun Body Material CONNECTIONS P1 = Air Inlet Size P2 = Fluid Inlet Size P1 = Max. Static Air Input Pressure ENVIRONMENTAL Air Cap Material Sound Pressure Level: <2.5 m/s² Available On Request Available On Request Max. Ambient Operating Temperature MATERIALS OF CONSTRUCTION Anodised Aluminum 40°C Nominal [104°F] Vibration Level: Sound Power Level: Solvent Resistant Seals and O-Rings Chrome Plated Steel AIR INLET PRESSURES FUNCTIONAL DESCRIPTION SPECIFICATIONS The PROLite spray…