DeVilbiss Advance HD Conventional P/S

Inside This Document

Service manual SB-E-2-973 for the DeVilbiss Advance HD range of conventional suction and pressure feed spray guns. The 17 pages include part numbers and kit contents, construction features and materials, specifications, and a full parts list with exploded view. Maintenance procedures cover servicing and replacing the air valve, needle packing and spreader valve assembly, spray head seal, and fluid inlet seal and suction cup care. Chart 1 (air caps) and Chart 2 (fluid nozzles and needles) match setups to the work, with troubleshooting to close.

From the Document

SB-E-2-973 ISS.07 ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns EN © 2015 Carlisle Fluid Technologies, dba Finishing Brands UK Ltd 2 Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents 4 Construction Features 4 Materials of Construction 4 Specifications & Technical Data 4 Safety Precautions 5 Parts List 6 Exploded parts View 7 Installation, Operation, Preventive Maintenance & Cleaning 8 Parts Replacement/Maintenance 9 A. Servicing Air Valve 9 B. Replacing Air Valve 10 C. Needle Packing, Spreader Valve Assembly 11 D. Spray Head Seal 12 E. Fluid Inlet Seal and Suction Cup maintenance 13 F. Chart 1 – Air Caps, Chart 2 – Fluid Nozzles & Fluid Needles 14 Troubleshooting Possible Problems in Operation 15 Accessories 17 Warranty 17 3 © 2015 Carlisle Fluid Technologies, dba Finishing Brands UK Ltd EC Declaration of Conformity We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of the Spray gun model ADVANCE HD declare, under our sole responsibility, that the equipment to which this document relates is in conformity with the following standards or other normative documents: BS EN ISO 12100: 2010, BS EN 1953: 2013; and thereby conform to the protection requirements of Council Directive 2006/42/EC relating to Machinery Safety Directive, and; EN 13463-1:2009, council Directive 94/9/EC relating to Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X. D Smith , General Manager 18 th December…