DeVilbiss DVX Pressure Feed Spray Gun Manual

Inside This Document

The service manual for the DeVilbiss DVX — a manual spray gun — 24 pages covering setup, air-cap and fluid-nozzle selection, cleaning and maintenance, and the exploded parts diagram with spare-part numbers. DeVilbiss finishing equipment distributed and supported in North America by CET.

From the Document

EN SERVICE MANUAL IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact your local Carlisle Fluid Technologies representative for additional copies of this manual. II 2 G X / Ex h II Gb X DVXP Low Pressure Air Atomisation Hand Spray Gun - Pressure Fluid Feed READ ALL INSTRUCTIONS BEFORE OPERATING THIS PRODUCT. SB-E-3-011 R1.0 (09/2024) www.carlisleft.com EN AIR INLET PRESSURES P1 = Max. Static Air Input Pressure 12 bar [175 psi] P2 = Max. Fluid Input Pressure 15 bar [217 psi] Available On Request Gun Air Inlet Pressure with gun triggered Vibration Level: Sound Power Level: Sound Pressure Level: See Table 1 - Page 8 <2.5 m/s² Available On Request FUNCTIONAL DESCRIPTION SPECIFICATIONS The DVX spray gun is a professional quality Air Atomising spray gun designed to comply with all global legislations. It is suitable for use with most paints and coatings supplied from a pressurised fluid suppy source. ENVIRONMENTAL Air Cap Material Stainless Steel Fluid Tip, Fluid Needle and Trigger Stud Air Valve Stem 3/8" BSP 1/4'' Universal Seals and O-Rings CONNECTIONS Trigger Electroless Nickel Plated Brass Anodised Aluminium Electroless Nickel Plated Brass Solvent Resistant Retaining Ring, Sprayhead, Adjusting Knobs, Air Valve Cage Springs, Clips, Screws 161 x 166 x 44 [6.3 x 6.5 x 1.7 in] P1 = Air Inlet Size P2 = Fluid Inlet Size Max. Ambient Operating Temperature MATERIALS OF CONSTRUCTION Stainless Steel Anodised Aluminium 40°C Nominal [104°F] Valve Bodies, Rear Housing, Packing Nut Electroless…