DeVilbiss Compact Mini

Inside This Document

Operating and service manual for the DeVilbiss Compact Mini, a spray gun — 16 pages. Covers correct use, safety, setup, operation, maintenance, and the spare-parts breakdown for service. Distributed by CET.

From the Document

EN SB-2-858-C ( 1 /2015) 4 / 16 MATERIALS OF CONSTRUCTION Gun Body Anodized aluminium Air Cap Nickel plated brass Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud Stainless steel Springs, Clips, Screws Stainless steel Seals, Gaskets Solvent resistant Trigger Chrome plated steel Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut, Air Cap Retaining Ring, Knobs Chrome plated brass Air Valve Assembly Stainless steel, HPDE SPECIFICATIONS & TECHNICAL DATA Air Supply Connection Universal 1/4" BSP and 1/4" NPS male Maximum Static Air Inlet Pressure P1 = 175 psi (12 bar) Nominal Gun Air Inlet Pressure for HVLP (HS1) and Trans-Tech ® (TS1 & RS1) with gun triggered 29 psi (2 0 bar) Fluid Supply Connection 7/16 – 14 UNC Service Temperature 32 to 104°F (0 to 40°C) Gun Weight (gun only) (with cup) 15 0 oz (425 g) 17 1 oz (485 g) CONSTRUCTION FEATURES 1 Air Cap (nickel plated brass for long durability) 2 Air Cap Retaining Ring (allows easy rotation of air cap) 3 Fluid Nozzle 4 Fluid Needle (grooved stem for easy removal) 5 Fluid Inlet (7/16” – 14 UNC thread) – accepts DeVilbiss SRI cup systems 6 Air Inlet (universal thread, accepts G 1/4 & 1/4 NPS) 7 Self Adjusting Needle Packing (for trouble free operation) 8 Trigger (ergonomic for comfort) 9 Trigger Stud & Screw (easy replacemen