DeVilbiss Compact I Automatic

Inside This Document

Operation manual SB-2-586-H for the DeVilbiss Compact-I automatic spray gun, where air cap selection determines the spray technology: conventional, Trans-Tech, or HVLP. The bilingual document (English pages 1–14, Spanish 15–28) covers replacement parts ordering, an explanation of the three atomization technologies, complete spray gun assembly ordering, and installation details — with the SP/SPA parts and accessories series for servicing Compact-I guns on automatic machines and fixed mountings.

From the Document

Service Bulletin SB-2-586-H Replaces SB-2-586-G OPERATION MANUAL COMPACT-I — AUTOMATIC SPRAY GUN CONVENTIONAL, TRANS-TECH & HVLP Air Cap Selection Determines Spray Technology English: Pages 1-14 Español: Páginas 15-28 Replacement Parts Ordering Information SEE PAGE 4 Explanation of Conventional, Trans-Tech and HVLP SEE PAGE 9 Complete Spray Gun Assembly Ordering Information SEE PAGE 10 Installation Details SEE PAGES 11, 12, 13, 14 Page 2 SB-2-586-H Operation Manual Compact-I Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment CHARACTERISTICS This automatic spray gun complies to ATEX regulations 94/9/EC, protection level II 2 G X, suitable to use in Zones 1 & 2. This Compact-I is a production spray gun suitable for use with automatic and semi-automatic machine in conventional, HVLP or Trans-Tech application. (See page 9 for application details.) To handle a wide range of coating materials the material passages are manufactured from high grade stainless steel. Several needles are available with plastic tips. Fluid tips and needles are available in high grade stainless steel. Pressure feed material supply can be re-circulating or direct. The needle adjustment knob has 18 ratchet positions (per one revolution of the knob) which allows fine and accurate fluid flow control. SPECIFICATIONS & MATERIALS OF CONSTRUCTION Thread Pressure Fluid inlet & recirculation “P” & "R" 1/4" BSPP(F) Max 7 Bars (100 psi) Air inlet (Atom & Fan) “A” & “F” 1/4" BSPP(F) Max 7 Bars (100 psi) Cylinder/trigger “Cyl” 1/8" BSPP(F) 4 to 7 Bars…