DeVilbiss AG-360 Air Cap & Tip Selection Guide

Inside This Document

A selection guide for the DeVilbiss AG-360 automatic spray gun range — 17 pages mapping models, air caps, and tips to the right application. DeVilbiss finishing equipment distributed by CET.

From the Document

AG-361 & 2 Air Cap and Fluid Tip Selection Guide Page 1 Dec 2015 C1 CONVENTIONAL #C1 Air Cap: Type: Conventional External Mix Used on Gun Type: JGA-HD & GFG-HD Suction, Pressure & Gravity Feed Spray Guns, AG361 & AG362 Automatic Guns CONVENTIONAL Used over Fluid Tips: GFG-HD JGA-HD Fluid Needle Suction Fluid Needle JGA-HD Pressure Fluid Needle Hole Size: PROC-230-085* Not Available PROC-230-10* PROC-230-12* PROC-230-14* PROC-220-14 PROC-220-16 PROC-220-18 Not Available Not Available Not Available GFGPRO-320 GFGPRO-320 GFGPRO-320 Not Available Not Available Not Available Not Available JGAPRO-330 JGAPRO-330 JGAPRO-330 PRO-305-085-10* PRO-305-085-10* PRO-305-12-14* PRO-305-12-14* JGAPRO-330 JGAPRO-330 JGAPRO-330 0.85mm 1.0mm 1.2mm 1.4mm 1.3mm 1.5mm 1.6mm For AG-360 series automatic spray gun needles see page 62 Air Consumption Graph (measured using JGA-HD gun with 1.4mm fluid Tip) Spray Pattern Pattern Shape: Long Ellipse Design Target Distance: 200mm (8”) Approximate Fan Size: 270mm long x 65mm wide @ 220 cc/min using 25 sec Din4 @ 200mm (8”) Target Distance Typical Applications: Wood, General Industrial, Metal, Adhesive, Plastic, Aerospace, Leather, Military, Decorative, Construction, Light Marine Typical Fluid Flow Specification: Small to Medium scale application Air Cap. 150-250 ml/min Viscosity Range Sprayed: 15 to 30 sec Din4 Material Supply: Suction, Gravity or Pressure Feed Original design specification: High Quality metallic Topcoats, Suction/Gravity application 2.5 to 3.0 bar nominal handle inlet pressure Materials of Construction Electroless Nickel Plated Brass Air…