DeVilbiss Advance HD HVLP Gravity

Inside This Document

Technical bulletin SB-E-2-970 for the DeVilbiss Advance HD HVLP and Trans-Tech gravity spray gun. The 16 pages include part numbers, operational description, kit contents, construction features and materials, specifications, safety precautions, and a parts list with exploded view, followed by installation, operation, and preventive maintenance procedures. Setup references (G510-13 air cap, JGA-156 gaskets, SN-34 needles) match the compliant gravity configurations to the material.

From the Document

SB-E-2-970 ISS.06 Technical Bulletin ADVANCE HD HVLP and Trans-tech ® Gravity Spray Gun E N 2 © 2013 Finishing Brands UK Ltd. Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents 4 Construction Features 4 Materials of Construction 4 Specifications & Technical Data 4 Safety Precautions 5 Parts List 6 Exploded parts View 7 Installation, Operation, Preventive Maintenance & Cleaning 8 Parts Replacement/Maintenance 9 A. Servicing Air Valve 9 B. Replacing Air Valve 10 C. Needle Packing, Fluid Insert, Spreader Valve Assembly 11 D. Separator Seal Replacement 12 E. Chart 1 – Air Caps, Chart 2 – Fluid Nozzles & Fluid Needles 13 Troubleshooting Possible Problems in Operation 14 Accessories 16 Warranty 16 © 2013 Finishing Brands UK Ltd. 3 EC Declaration of Conformity We, Finishing Brands UK Limited, Ringwood Rd, Bournemouth, Dorset, BH11 9LH, UK, as the manufacturer of the Spray gun model Advance HD , declare, under our sole responsibility, that the equipment to which this document relates is in conformity with the following standards or other normative documents: BS EN 292-1 PARTS 1 & 2: 1991, BS EN 1953: 1999; and thereby conform to the protection requirements of Council Directive 98/37/EEC relating to Machinery Safety Directive, and; EN 13463-1:2001, council Directive 94/9/EC relating to Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres protection level II 2 G X. This product also complies with the requirements of the EPA guidelines, PG6/34. Transfer efficiency certificates are…