Binks Trophy Air Cap Maps

Inside This Document

Reference guide for the Binks Trophy Air Cap Maps — air cap, nozzle, and setup selection data to match the right configuration to the application. Distributed by CET.

From the Document

BINKS 16 AIR CAP PART NUMBER 46-6505 Orifice Size TROPHY MANUAL PRESSURE FEED GUN TROPHY AUTOMATIC SPRAY GUN # 16 AIR CAP 1.0mm Size Part Number Type : 1.2mm 2465-12CN-16S0 3465-12CN-16S0 1.0mm 45-11050-10 External Mix 1.4mm 1.2mm 45-11050-12 Pressure Feed 1.6mm 1.4mm 45-11050-14 Siphon Feed 1.8mm 1.6mm 45-11050-16 1.8mm 45-11050-18 SPRAY PATTERNS PRESSURE Typical Fan Pattern Size: Pressure: 2" - 4" SIPHON Typical Applications: Typical Fluid Flow Specifications: General Industrial, Small Parts 5 oz - 9 oz per minute flow rate (150cc - 270cc) 15 sec. - 30 sec. Zahn 2 Viscosity Materials Fluid Supply: Pressure Feed and Siphon Feed Original Design Specification: Lacquers, Enamels 40 PSI to 80 PSI AIR INLET PRESSURE Materials of Construction: Aluminum Air Cap, Anodized Part Numbers: 46-6505 Air Cap 54-6120 Air Cap Ring (Must be purchased separate) Notes: Air cap designed Round spray for low to medium viscosities and finer atomization applications. This air cap will also work with all fluid nozzles ranging form 1.0mm to 1.8mm and siphon applications. Fluid Flow Rate: 200cc/min Viscosity Sprayed: 25 Secs, Zahn 2 Cup Fluid Nozzles: Pattern Shape: Round Shape Pattern Design Target Distance (Typical): 8" COMPATIBLE STAINLESS STEEL FLUID NOZZLES Pressure 1.4mm Siphon 1.8mm 0 2 4 6 8 10 0 1